GCOS 1.5 autoload

[DeepBlade]

i get a blank screen.. when i use vhq-cardwriter_1.1 and edit some of the commands to inject GCOS 1.5 (renamed as level3.dol) and replace it in my 251 block official nintendo mem card....... i read the thread about using nikita's format.dol or something.... to get level3 to work on big (i'm assuming u mean 251 blocks) mem cards..... but i don't know how to use it

i tried for so long, different ways of setting it up.... i read the thread where ppl are posting raw images of the mem cards..... so i tried some of them, but what's the point of sharing raw images of ur mem card if it'll corrupt ur card, but will only work from the memory card it came from?????

and now i give up...

can someone just create a new vhq-cardwriter? or tell me what i'm doing wrong? i could have sworn this is how u autoboot GCOS.. by making it level3.dol and inject that using ctr-gcs....

[emu_kidid]

try my memcard installer v0.5 after using format.dol on your card (it will erase your card!)

[DeepBlade]

nope, didn't work, it does the same thing as injecting with ctr-gcs

format.dol, it makes the card unreadable in the GC save manager, am i supposed to format it using the GC save manager as well?

[emu_kidid]

format.dol, it makes the card unreadable in the GC save manager, am i supposed to format it using the GC save manager as well?

Yes you will need to do this also.

[DeepBlade]

i will try again tomorrow
it's 3am right now.. gonna go to sleep Zzz..

thx for ur replies, emu

[DeepBlade]

Ok, It works now, thanks emu!

i formatted using format.dol, formatted using GC save manager in the original bios, made installers (using Memcard Installer v0.5) for AR, level2, level3 (gcos1.5) and wrote them to the card, in that order..

sorry if i had to make this an isolated thread.. i should have posted in the thread "Memcard Installer v0.5 and samsons install.dol hack"

[emu_kidid]

Very cool that it worked.. hehe I couldn't get it working myself but now i'll just follow this guide ;)

[DeepBlade]

here's the package that i made

*EDIT!!*
please read this thread for a *complete* tutorial:
http://www.gamecubeos.com/modules/newbb/viewtopic.php?topic_id=32&forum=10

[kel]

Cool, thanks DeepBlade. Now I can make memory cards for other people that work with AR by using my Viper Extreme USB.

Up until now I hadn't got 'round to learning how to do softmods but this Guide of yours is so simple and can be done by just injecting .dol files.

Most people just find the solution to their problems in the forums and then just keep it to themselves but you've gave something back. Nice one :)

[DeepBlade]

heheh, no problem, I'm glad I could help.

I was afraid that my instructions were still a little too complicated for the average newbie to the scene, since i didn't explain how to run DOLs (via PSO+BBA or other means)... not saying that you are one, but if anyone still has questions, i'll be periodically checking back here if u still have any questions about how things work..

and if I have time, i'll make a package that installs GCOS 1.5 'with' a menu, for those that have an official nintendo 251 memory card and can afford to put more apps on the mem card, and obviously, i'll keep these packages updated whenever a new version of GCOS is released.

Thx for making this a sticky, emu! I'll continue to pledge lots of support to this forum.

[Abaddon666]

Hey, DeepBlade, great stuff !!!

I've got one question though: Your "4 install-gcos15.dol" is the only dol, which installs a working GCOS15 to my MemCard. Whenever I try to make one using dol2gci etc. on GCOS1.5 or the beta it won't boot. Only black screen after booting from AR. Is there anything special with this version ? How did you make it ? I realized, that it takes 40 Blocks on my MC, whereas my other "tries" only took 16 or 18 Blocks. This seems to be the reason why they don't work, so what do I have to do in order to get working install files for dols to boot from MemCard ?
Also another question, is there any way to copy a raw-image of a MemCard on MC using "memcard installer v0.5" or any other tool, using only AR+SD-Adapter ? I don't have a bba.

THX in advance,

Abaddon666

[DeepBlade]

no, there's nothing special about the GCOS1.5 it installs, it's the same as if you download straight from the GCOS site.. my "4 install-gcos15.dol" was made from using Memcard Installer v0.5.... all it does is write GCOS 1.5 to your memory card

you're not supposed to write the install files such as "4 install-gcos15.dol" to your memory card... all you have to RUN it (along with the other install files), and they will write the necessary files to your mem card such that GCOS 1.5 will autoboot straight from AR.... you don't need to boot the install files from your mem card

i think mem card installer only writes dols to your mem card.. if you want to write a raw image of a mem card to your mem card, i believe you need a BBA and use ctr-gcs

i hope i've answered your questions... feel free to ask more if you're still confused

[Abaddon666]

no, there's nothing special about the GCOS1.5 it installs, it's the same as if you download straight from the GCOS site.. my "4 install-gcos15.dol" was made from using Memcard Installer v0.5.... all it does is write GCOS 1.5 to your memory card

you're not supposed to write the install files such as "4 install-gcos15.dol" to your memory card... all you have to RUN it (along with the other install files), and they will write the necessary files to your mem card such that GCOS 1.5 will autoboot straight from AR.... you don't need to boot the install files from your mem card

i think mem card installer only writes dols to your mem card.. if you want to write a raw image of a mem card to your mem card, i believe you need a BBA and use ctr-gcs

i hope i've answered your questions... feel free to ask more if you're still confused

Well, u misunderstood me. I tried making install.dols from the *(PSO).dols of the GCOS15-Release and executed them. They copied the level3.dol on memcard, but when running action replay in order to execute level3.dol, all I get is a black screen. The only working level3.dol was yours, and that's why I wonder, how you made "4 install-gcos15.dol", especially which dol u used in for Memcard Installer v0.5. The level3.dol I get on my Memcard using your "4 install-gcos15.dol" takes 40 Blocks in space, whereas the install.dols I made on my own from GCOS15(PSO).dol copied a level3.dol on my Memcard, which only took 16 Blocks or so.
I need to know this because I want to run the new beta, the one with multidisk support, from Memcard, not the GCOS1.5.final. In order to achieve this I need a working install file, I know. But as stated above I can't get this method to work. Although my install.dols do copy a level3.dol on the Memcard, they cannot be executed out of AR, so I'm asking you, how exactly your "4 install-gcos15.dol" was made, step-by-step, especially, which level3.dol you used.

Hope I made myself clear this time, it's been a long time since I had english at school...

THX again,
Abaddon666

[DeepBlade]

with "GCoS 1.5 (PSO).dol", I renamed it to level3.dol, dol2gci-ed it to myfile.gci, and used "Memcard Installer v0.5"'s makedol.bat command.... to create "4 install-gcos15.dol"...

similarily, you can rename "GCoS Public Beta.dol" to level3.dol, dol2gci it to a file named myfile.gci and use Memcard Installer v0.5 to create an installer of your own...

I hope this helps :o

[chuy1984]

wath can i do to put gcos 2 in my memory card???

i actually have gcos1.5 .raw in my original memory 59, and action replay, and works very well.

But i want to put the gcos 2 in another memory or put both in the same memory.

Can you make a gcos 2 autoload or a raw image or tell me a step by step guide to put the files incuded in the gcos libo...rar????

tanks

Sorry about my english

México city.

[DeepBlade]

how did you get GCOS1.5 in your original 59 memory card in the first place? you must have had a BBA (broadband adapter) and PSO (Phantasy Star Online 1+2), or Max Drive Pro or a mod chip......

if you want step by step instructions, you're going to have to tell me what tools you have that got your GCOS1.5 on your memory card in the first place....

[chuy1984]

first i buy the gcos 1.4 teaser in a store, here in méxico, the second (gcos 1.5) using a raw file with ctr-gcs

[DeepBlade]

people are actually selling GCOS?? what the hell...
ok, well, if since u used ctr-gcs, u run ctr-gcs.dol, and so if u want to write GCOS open beta to your mem card, then you create an installer for it using Memcard Installer v0.5

[DeepBlade]

************************************************** *******
ok i've written a complete guide at gamecubeos.com, you can read it here:
************************************************** *******
http://www.gamecubeos.com/modules/newbb/viewtopic.php?topic_id=32&forum=10

[silverintegra]

does it have to be officail memory card? can it be 3r party?

[Exidus]

Thanks for the really easy way to autoload GCos1.5 Deepblade but I just wanted to know if the AR option in the Gcos1.5 menu if it works and if it does how does it work. Each time I use it the srceen goes black and thats it.

[heggie]

To use AR inside GCoS, you need to create a "special" GCoS, with an ar dol embedded, look at the readme included with GCoS1.5F AR Builder. Can myself only get the ar108 to work, at least running. It does not start any of my games though, and resets my AR databse each time......:mad:

[xalia]

are there any pros and cons using this method instead of the max drive pro method? :confused:

[emu_kidid]

are there any pros and cons using this method instead of the max drive pro method? :confused:

Not really.

Only thing is the MDP memcard might become dodgy so this way might be more stable if using an official memcard 251.

[xalia]

Yes mdp is buggy, I spent like one hour, just to transfer the GCOS 1.5 to the mdp card. After that i copy the gcos to another card just to be sure...
I 'd like to try the method with the AR, can I use the gecko sd card reader instead of mdp?

[emu_kidid]

Yes mdp is buggy, I spent like one hour, just to transfer the GCOS 1.5 to the mdp card. After that i copy the gcos to another card just to be sure...
I 'd like to try the method with the AR, can I use the gecko sd card reader instead of mdp?

Yes you can use it with a method called SDLoad. (which requires only a AR setup with a SD Adapter+card)

[xalia]

I followed the instructions, did exactly what you say!
When I start the cube with the action replay disc and the official mem card in slot b, the action replay update my card!

[Dirtyspike]

Hi, I'm New here, I just noticed that anyone can Emulated Super Smash bros melee. And it's Wonderfull, but there is a big problem: The gamecubeos website has been deleted (or sort of...); so where can I get the the GCoS 1.5 Final???

Is the only thing I need

[eljkb]

ai caramba eu nao entendo nada

[Dan The Man]

Hi, I'm New here, I just noticed that anyone can Emulated Super Smash bros melee. And it's Wonderfull, but there is a big problem: The gamecubeos website has been deleted (or sort of...); so where can I get the the GCoS 1.5 Final???

Is the only thing I need

you know what your right im also new here and somehow everywhere i go everyone keeps requesting on that site if anyone can just give a link to a storage site that you can download from for free just post it:mad:

[Dirtyspike]

you know what your right im also new here and somehow everywhere i go everyone keeps requesting on that site if anyone can just give a link to a storage site that you can download from for free just post it:mad:
Ok, here is the GCOS 1.5, i couldn't use it because the graphic card that i was going to buy is sold out, now i can't find it; anyway i forgot about the gamecube emu... However i found this in a Spanish forum: http://www.mediafire.com/?mckzzm1wmyx
P.S: If you need something else, just reply to see if i can be of help

[phuriqz]

hey i got a gamecube emulator i dunno how to use the gc 1.5 thing =p could you help me? D=