garyopa
05-25-2012, 12:07 PM
Easy steps
http://www.maxconsole.com/maxconsole/contents/RKLS0000009047/icon_xl.jpg
Now, with the recent iOS 5.1.1 jailbreak for iOS devices, it's time to do the same rooting the Android flagship Samsung Galaxy S III smartphone
Are you one of the proud owners of the new Samsung Galaxy SIII?
What about rooting the device to do what you want to it? Sounds good enough for you?
If the answer is "yes" you should follow this easy-guide the folks of Redmondpie have prepared:
As usual, follow at your own risk. This tutorial is posted for information purposes only.
Step 1: Download (http://download.chainfire.eu/166/CF-Root/SGS3/CF-Insecure-SGS3_XX_NEE_ALE8-v1.2.zip) the insecure kernel (based on the XX NEE ALE8 firmware) from Chainfire.
Step 2: Download (http://forum.xda-developers.com/attachment.php?attachmentid=581913&d=1304094576) ODIN 1.85, which we’ll be using to flash the insecure kernel.
Step 3: Once you’ve download both, extract using the archiving tool of your choice. I use WinRar, but if you’ve done this before, you’ll probably have your utility of choice already installed.
Step 4: After extracting the kernel, you’ll be left with a .tar file.
Step 5: Place your device into Download Mode by pressing and holding the Volume Down + Power / Lock buttons simultaneously, and pressing Volume Up when prompted.
Step 6: Run ODIN, connect your device to your PC via USB, and within ODIN, click on PDA and select the .tar file you extracted from the insecure kernel.
Step 7: Click Start and the flashing process will begin.
Step 8: Now you will need to "upgrade," as it were, from insecure to full root. To do this, you’ll need to boot your Galaxy S III, and enable USB Debugging by browsing to Settings > Applications > Development.
Step 9: Your insecure root allows adb root commands, but won’t enable your apps to get superuser access; thus, you’ll need to install SuperSU.
Step 10: Download (http://forum.xda-developers.com/attachment.php?attachmentid=1070681&d=1337437295) the sgs3-root-install.zip file [XDA Developers link], which contains SuperSU v0.89, and extract it.
Step 11: With adb running, double-click the install.bat, and after a reboot, your Samsung Galaxy S III will be fully rooted!
More info in the link below.
NEWS SOURCE: How-to Root Galaxy S-III (via) RedMondPie (http://www.redmondpie.com/how-to-root-galaxy-s-iii/)
Our thanks to 'Kaos2K' for this news item!
http://www.maxconsole.com/maxconsole/contents/RKLS0000009047/icon_xl.jpg
Now, with the recent iOS 5.1.1 jailbreak for iOS devices, it's time to do the same rooting the Android flagship Samsung Galaxy S III smartphone
Are you one of the proud owners of the new Samsung Galaxy SIII?
What about rooting the device to do what you want to it? Sounds good enough for you?
If the answer is "yes" you should follow this easy-guide the folks of Redmondpie have prepared:
As usual, follow at your own risk. This tutorial is posted for information purposes only.
Step 1: Download (http://download.chainfire.eu/166/CF-Root/SGS3/CF-Insecure-SGS3_XX_NEE_ALE8-v1.2.zip) the insecure kernel (based on the XX NEE ALE8 firmware) from Chainfire.
Step 2: Download (http://forum.xda-developers.com/attachment.php?attachmentid=581913&d=1304094576) ODIN 1.85, which we’ll be using to flash the insecure kernel.
Step 3: Once you’ve download both, extract using the archiving tool of your choice. I use WinRar, but if you’ve done this before, you’ll probably have your utility of choice already installed.
Step 4: After extracting the kernel, you’ll be left with a .tar file.
Step 5: Place your device into Download Mode by pressing and holding the Volume Down + Power / Lock buttons simultaneously, and pressing Volume Up when prompted.
Step 6: Run ODIN, connect your device to your PC via USB, and within ODIN, click on PDA and select the .tar file you extracted from the insecure kernel.
Step 7: Click Start and the flashing process will begin.
Step 8: Now you will need to "upgrade," as it were, from insecure to full root. To do this, you’ll need to boot your Galaxy S III, and enable USB Debugging by browsing to Settings > Applications > Development.
Step 9: Your insecure root allows adb root commands, but won’t enable your apps to get superuser access; thus, you’ll need to install SuperSU.
Step 10: Download (http://forum.xda-developers.com/attachment.php?attachmentid=1070681&d=1337437295) the sgs3-root-install.zip file [XDA Developers link], which contains SuperSU v0.89, and extract it.
Step 11: With adb running, double-click the install.bat, and after a reboot, your Samsung Galaxy S III will be fully rooted!
More info in the link below.
NEWS SOURCE: How-to Root Galaxy S-III (via) RedMondPie (http://www.redmondpie.com/how-to-root-galaxy-s-iii/)
Our thanks to 'Kaos2K' for this news item!