I did Xploit for a friend of mine
He got Reset loops , After plugging in Eternet cable it works
but then it will reoccur AGAIN, when cable is NOT present
What causes this i tell ya all now
U R swapping around the .XFT so the MSDash that looks for them cannot see them Right and resulting in the dash not working
So if ya do an Xploit at all make sure MSDash i up and running then u WONT run into them problems at all
thought i would mention tho' When i get this FAR WITH a WORKING Xploit, my suggestion is, u cannot use XBox LIVE anyhow Flash the TSOP and install Slayers, or simular or put Everything BACK to orignal state ADDIND EvoXdash.xbe and evox.ini, then u will ALWAYS be modded up, with BOTH EVO-X and MSDash
this way runs perfect and Console acts like it has a REAL chip inside, If ya too cheap/Lazy or cannot solder a chip inside ur system this i would reccomend is DEFINATLY the way to go
DO NOT USE AUDIO XPLOIT EITHER, I HAVE FOUND A FLAW WITH THIS ALSO !!! PLZ READ OTHER THREAD
Backwards Compatible PS3/ 320GB
White PSP Slim/ 5.00 M33-6 + CR-5400 - 16 GB,
Crystal XBOX/ v1.0 TSOP Flashed, XBMC + 320 GB,
Sega Saturn/ Custom 50/60Hz + 4in1 Action Replay.