i tried with xbox hoooked up, with power on than off.i boot by nt dos free dvd with my dvd -rom drive and a hd on ild master2.
dosflah will only find my ide drives which are my ide dvd drive and my ide hdd on master2.
do's not find my sata via vt6421a card at all.
i tried in mtkflash patched with my via vt6421 port 1440
and nothing.i did my spoofed sammy with my lite-on keys
with my patched mtkflash.
now i am stuck on this lite-on
hardrives lock up.
use a boot device such as a usb pendrive to get dos.
i only use the hdd to save my lite-on files with.
once i treid makeing a usb iprep momery stick, i copy the files to dvd
the dvd boot at a green screen and just sat there all day.
my pc can't boot by usb.just by cd or by hdd.
have you got a floppy drive i know its an old format but thats how i flashed 2 of my liteon drives from booting to dos using my floppy disc
Question. I flashed my lite-on with a samsung firmware and now i cannot see it in dos flash.. Am I screwed???
i typed lite lite-on e it says it was erased but then it fails flashing it. i says something about an unknown flash size. 0 kb's when it should be 256kb. I'll do it again and write the exact message i get
Ok after I accidentally flashed my lite-on with the samsung firmware. I tried to re flash the lite-on with dosflash it says unknown flash size.
Last edited by thor107; 12-28-2008 at 04:48 AM.
Ok I fixed it. during when dos flash starts turn the 360 xtrackor off and on twice, press e. right after you hit enter turn it off and on quickly (within) a second and the lite on should erase. After that flash it with your custom firmware. Thanks for the input everyone.
Can I use a buffered jtag, it uses a 3.6 volt battery pack?
Its not my xbox with the Lite-on dvd, so I am not sure if I should try and read the keys. But I would like to try!
try it theres no harm it will either work or it wont.but,theres no harm in trying it.
also i seem to find that to get a liteon to erase and flash in dos i actualy need it to error out in jungle flasher or it erases with liteon e in dosflash but,returns unknow chip error when asked to write.
seems weird but,it happened today with a drive.i thought i will have to use jungle flasher and then it locked on bank 3 of erase and then when that happened i went to dosflash and ran liteon e option and when it finished erasing i ran write option and i had no probs,it asked me for name of firmware and when i entered it it ran the flash no probs,checksum'd everything good.
now thats weird s**t man as i have to have a drive thats error'd or dosflash aint good for me.every error'd drive it erases and flashed no probs.
so it gos to show that you can post your tutorials and it will only help some and then you can post what works for you but,it wont work for others.