Volt Brothers for Android
+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 15 of 18

Thread: Flashing/Upgrading Lite-On.

  1. #1
    Join Date
    Nov 2009
    Posts
    14
    Total Thanks Given
    0
    Total Thanks Received
    0
    Total Thanked Posts
    0

    Flashing/Upgrading Lite-On.

    Hi,

    How are you guys? I found this site few days ago. You did a good job.
    Anyway, i have a question. I have a liteon drive and its already flashed/modded. I can play backup games but i cant play new wave3 games,wave4 games. I want to upgrade my drive. Is it possible to do this without any kits/probe? Because my drive can already play backup games. So i just want to upgrade to 1.5/1.6.

    Thank you,

    Kurdy

  2. #2
    Join Date
    Jul 2003
    Posts
    1,447
    Total Thanks Given
    0
    Total Thanks Received
    0
    Total Thanked Posts
    0
    yes that is possible, once its modded you dont need the probe/spear anymore.
    My signature has been deleted by the MaxConsole Admin

  3. #3
    Join Date
    Nov 2009
    Posts
    14
    Total Thanks Given
    0
    Total Thanks Received
    0
    Total Thanked Posts
    0
    Thank you.

    So i can i use my xbox to power up the drive and use a sata/usb cable to connect it to my laptop?

    Thanks.

  4. #4
    Join Date
    Nov 2009
    Posts
    14
    Total Thanks Given
    0
    Total Thanks Received
    0
    Total Thanked Posts
    0
    Quote Originally Posted by lenselijer View Post
    yes that is possible, once its modded you dont need the probe/spear anymore.
    Thats good..what about the C3K? Can i do it without C3K?
    Because my drive is already flashed. And i can connect it to my pc with sata cable and power it up by xbox. But some said that i need the key and without key its not possible and you can only get the key by C3K. Is this true?

  5. #5
    Join Date
    Apr 2006
    Location
    bradford west yorkshire
    Posts
    6,053
    Total Thanks Given
    0
    Total Thanks Received
    0
    Total Thanked Posts
    0
    just power the drive with it half open,use jungleflasher and use the get dummy from ixtreme option in dvdkey32 page.also there is a user guide for jungleflasher,i would be pretty confident all your questions would be answered in there.after all,oggyuk took time out to put it together with others (perhaps) so at least take some time out to read it.

    its in pdf format,its USER GUIDE theres a link to it on the first page of jungleflasher,i think jungleflasher as a site also,so if there is,check it out.

  6. #6
    Join Date
    Nov 2009
    Posts
    14
    Total Thanks Given
    0
    Total Thanks Received
    0
    Total Thanked Posts
    0
    Thanks again. I will try it today. By the way im just asking its my first time and yes i know there is a search option. i did some researche but i was confused because there alot of threads and guides. some said u can flash without c3k some said not..anyway i will try it today home. thanks again.

  7. #7
    Join Date
    Jan 2007
    Location
    London
    Posts
    2,073
    Total Thanks Given
    0
    Total Thanks Received
    0
    Total Thanked Posts
    0
    You do have all the orginal files though yeah?
    Otherwise you need the probe to get the files again.

  8. #8
    Join Date
    Nov 2009
    Posts
    14
    Total Thanks Given
    0
    Total Thanks Received
    0
    Total Thanked Posts
    0
    Quote Originally Posted by showstopper View Post
    You do have all the orginal files though yeah?
    Otherwise you need the probe to get the files again.
    No i dont..i bought my xbox and it was already modded.. so its not possible then?

  9. #9
    Join Date
    Apr 2006
    Location
    bradford west yorkshire
    Posts
    6,053
    Total Thanks Given
    0
    Total Thanks Received
    0
    Total Thanked Posts
    0
    yes you can get the info without fancy probes,i told you earlier how to do it.how you power the drive though is different as its up to you.you can use a console or a connectivity kit but,no!you dont need the probe for a previously flashed xbox360.

    you just power the drive with the tray half open,then hit the GET DUMMY FROM IXTREME option in jungleflasher.it will read a dummy.bin with all the details ( key etc) and a serial.bin and inquiry.bin also.

  10. #10
    Join Date
    Nov 2009
    Posts
    14
    Total Thanks Given
    0
    Total Thanks Received
    0
    Total Thanked Posts
    0
    Quote Originally Posted by saleem View Post
    yes you can get the info without fancy probes,i told you earlier how to do it.how you power the drive though is different as its up to you.you can use a console or a connectivity kit but,no!you dont need the probe for a previously flashed xbox360.

    you just power the drive with the tray half open,then hit the GET DUMMY FROM IXTREME option in jungleflasher.it will read a dummy.bin with all the details ( key etc) and a serial.bin and inquiry.bin also.
    Thank u verry much my friend. I will try it today..

    Thanks again!

  11. #11
    Join Date
    Apr 2006
    Location
    bradford west yorkshire
    Posts
    6,053
    Total Thanks Given
    0
    Total Thanks Received
    0
    Total Thanked Posts
    0
    i thought you would have had it done now,just be sure to ask if you are unsure,rather than going and making mess of stuff.get the user guide its on jungleflashers first page,theres a link which has USER GUIDE on it.

  12. #12
    Join Date
    Nov 2009
    Posts
    14
    Total Thanks Given
    0
    Total Thanks Received
    0
    Total Thanked Posts
    0
    Why does my windows not regonize my drive?
    Its installed as Usb Mass Storage. And i cant find it in JungelFlasher

  13. #13
    Join Date
    Nov 2009
    Posts
    14
    Total Thanks Given
    0
    Total Thanks Received
    0
    Total Thanked Posts
    0
    Saleem, ive read this in the jungelflasher guide:

    The older 74850C requires additional hardware (it requires the utilization of a RS232 to TTL
    serial hardware, or a popular variant such as Maximus USBXtractor & powerunit or
    Connectivity Kit v3 (optional probe) or Maximus Xtractor (with optional spear)) to obtain the
    drive specific data (key/inquiry/identify) which once extracted are used to create the
    dummy.bin


    My dvd drive is 74850C and i dont think my firmware is 1.5 or higher i think its old? Can i still do it or is it not possible without the kit and probe?
    Because my windows does not regonize my drive...its showing Usb Mass Storage..?

    Bytheway i have connect my drive with a sata-to-usb cable..so its connected by usb to my laptop.
    Last edited by Kurdy; 11-06-2009 at 01:41 PM.

  14. #14
    Join Date
    Apr 2006
    Location
    bradford west yorkshire
    Posts
    6,053
    Total Thanks Given
    0
    Total Thanks Received
    0
    Total Thanked Posts
    0
    theres only 3 fw's for liteon 74850 at the moment.1.5,1.51 and 1.6.

    if you got ix1.5 then i dont know if the dumping key over sata was enabled but,if you got 1.51 or 1.6 you 100% can dump it the way i say.its in the readme for these fws if you look at it.

  15. #15
    Join Date
    Nov 2009
    Posts
    14
    Total Thanks Given
    0
    Total Thanks Received
    0
    Total Thanked Posts
    0
    Quote Originally Posted by saleem View Post
    theres only 3 fw's for liteon 74850 at the moment.1.5,1.51 and 1.6.

    if you got ix1.5 then i dont know if the dumping key over sata was enabled but,if you got 1.51 or 1.6 you 100% can dump it the way i say.its in the readme for these fws if you look at it.
    Well i think i have 1.5 because 1.51 can play wave 3 games right? My console cant play wave 3 games..so that means i have 1.5? What about my problem? the one telling me that my device is a Usb Mass Storage? Is that normal?

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts