Step-by-step guide to install and setup the iTouch 2 for Nintendo DS Lite and DSi with the latest Driver / Kernel / Firmware:

1. Download the latest driver/kernel/firmware from:
a) The official website: www.itouchds.com
b) Our UK server here - it is faster than the official website

2. Before copying the driver/kernel to the microSD, please format your microSD on your PC. This is to remove all the data on the memory card.
a) After inserting the microSD into the card reader, go to My Computer.
b) Right click the driver representing the microSD memory card.
c) Choose Format

d) Click Start to format the memory card

3. Unzip the file downloaded (using Winrar) on your PC
a) Unzip the driver/kernel/firmware file.
b) Winrar can be downloaded from www.download.com by searching for Winrar at the Search.

The above pictures are based on R4i SDHC. The file names for iTouch 2 driver differ from those belonged to R4i SDHC.

c) Select and copy all the unzipped files.

The above pictures are based on R4i SDHC. The file names for iTouch 2 driver differ from those belonged to R4i SDHC.

4. Copy the unzipped files to the microSD memory card

The above pictures are based on R4i SDHC. The file names for R4i Ultra differs from those belonged to R4i SDHC.

5. Copy your own files, including music, movies, pictures and homebrew games to the microSD memory card

6. Plug in the microSD to the Acekard.When inserting or changing carts on slot-1, switch off the DS, insert in the cart and then start the DS.