BoxZii releases new firmware 1.1b and software 1.09

[garyopa]

For its Xbox 360's external HD solution



New version of both BoxZii's Module 1 and 2 firmware have been released.

For all of you who doesn't know what BoxZii is, here is a brief explanation:

BoxZii - USB HD for 360

Module 1 : Internal Mainboard + USB PC Control Dongle

Enjoy all the USB HD power inside your XBOX 360 , play games with ULTRAFAST loadings and avoid more then 75% of 3 RED LIGHTS OF DEATH posibilites and more.

-Xbox 360 XDG2/XGD3 Compatible
-Supports Dash (2.14699) included
-Supports FAT models / AP25/AP26 Silent Update Emulation
-Supports SLIM consoles including 0225,etc.. drives
-Plug and Play/Requires DVD Key
-NO FLASHED DRIVE or JTAG EXPLOIT required
-100% SOLDERLESS
-USB 2.0 and ULTRAFAST LOADINGS
-Avoid Overheating and >75% 3 Red lights of Death posibilites
-Avoid tedious drive fw reflash
-DVD/DL/Multigame compatible
-Full upgradeable by USB/JTAG
-Remote ISO selector by Iphone/Ios/Android systems (Requires WIFI)

Module 2 : External Full Colour 2'2" TFT Touchscreen panel for USB HDD/Pendrive (No PC required)

-Full Colour 2'2" TFT Touchscreen
-Full Colour touchscreen coverflow iso/config selection system
-3 Ports HUB included for USB HDD/Pendrive (No EXTRA Hub cost)
-NTFS Filesystem supported
-USB / SD upgrades for Actel and Microcontroller system
-External SD socket (No needed disassembly if SD card replacement required)
-Full clean installation / Place the module 2 whereever you want
-Easy Installation/Just need plug USB cable from Boxzii Module 1

Said that, you may want to know that the team behind has updated the firmware and the software of the device to add more features and to polish some other.

Here is the changelog for both:

BOXZII MODULE 1 1.09b :

Added Autopatching AP26/XGD3 C4eva Standard topology (isos are not patching required)
Liteon 0225/0401/1071 drives fix -> Please generate your own ofw.bin

Make a dummy.bin of your firmware drive using external tools (Jungleflash 1.92) , now select your dummy as SOURCE and your (or a stock original) firmware of your drive as TARGET,click at SPOOF SOURCE TO TARGET, save the firmware as "ofw.bin" , copy this file + key.bin + inquiry.bin to your folder , done!
[/TD]
[/TR]
[/TABLE]

[TABLE]
[TR]
[TD]Module 2

FIRMWARE 1.1 :

Added switches on Touchable in-screen configuration

FIRMWARE 1.0 :

Added stability over some few FAT consoles
Modified intro screen
Boxzii folder unlocked for navigation
Added configuration options at the microsd config.txt file
Added Special KIDS Mode (Shows coverflow with stored isos at SDA1 \boxzii folder directly)
Autoboot function changed,Autoloads lastest played iso or forces emulator mode if it's not found
Redesigned drivemode menu
Liteon 0225/0401/1071 drives fix -> Please generate your own ofw.bin

Make a dummy.bin of your firmware drive using external tools (Jungleflash 1.92) , now select your dummy as SOURCE and your (or a stock original) firmware of your drive as TARGET,click at SPOOF SOURCE TO TARGET, save the firmware as "ofw.bin" , copy this file + key.bin + inquiry.bin to your microsd folder , done!

OFFICIAL SITE: http://www.boxzii.com/

Our thanks to 'Kaos2K' for this news story!

[saleem]

your just better off with rgh,forget dvdrom emulation,just get rgh/jtag and enjoy xbla and dlc also.