SCDA works direct boot.
Verb Discs at 2.4x with clonecd
LITEON 1365s or something like that.
SCDA works direct boot.
Verb Discs at 2.4x with clonecd
LITEON 1365s or something like that.
burner: Pioneer dvr-111dbk
burner FW: 1.23
Media: Philips 2.4x
Backup: Dead Rising PAL-UK
Drive: 47dj
Boot:NO
burnspeed 2.4x
burner: Pioneer dvr-111dbk
burner FW: 1.29
Media: Philips 2.4x
Backup: Dead Rising PAL-UK
Drive: 47dj
Boot: Direct, IF burned at 1x
burnspeed 1x
remarks: burned at 2.4 with FW 1.23 it has a lot of trouble booting, at fw 1.29 and burned at 1x, it boots 75% of the time directly, if not, just eject/reload. Seems iffy Media.
edit: I experience a lot of hangups with this media. Which really sucks considering DR's save system.
Last edited by bavelb; 10-23-2006 at 04:57 PM.
I have an old Pioneer dvr108 burner with v1.2 firmware and a 360 with a samsung/toshiba dvd rom.
Will my burner be able to backup my games ok, is is compatable?
Just about all the other Pioneers mentioned here are 111's, the newer model.
Also Verbatim are the best discs to use for backups right?
Considering this is a thread about compatibility with Hitachi drives, chances are that people reading this can't give you the answer.
Sorry about that, didnt see the word Hitachi just the heading which saids Media, burner and game compatibiltiy and I had a burner question.
So now I stand corrected is there a link somewhere else here where I can see if my burner is compatible with burning 360 games?
Thanks.
burner: Pioneer dvr-111dbk
burner FW: 1.29
Drive: 47dj
System: PAL
Backup: Kameo Pal-EU
Media: Philips 2.4x
Boot: Direct
Backup: Call of duty 2 PAL-EU
Media: Verbatim 2.4x
Boot Direct
Backup: GRAW PAL-EU
Media: Verbatim 2.4x
Boot Direct
Backup: Splinter Cell DA
Media: Verbatim 2.4x
Boot Direct
Last edited by bavelb; 10-25-2006 at 11:11 PM.
burner: NEC 4551A
burner FW: 1.08
360 Drive: Hitachi 47dj
FW: OPA 2.1
System: PAL
Backup: Marvel Ultimate Alliance PAL EU
Media: Verb 2.4x
Boot: Direct
NO GO
++++++++++++++++++++++++++++++++++++++++++++++++++ ++++
Backup: Chrome Hounds PAL-EU
Media: Verbatim 2.4x
Boot Direct
NO GO
++++++++++++++++++++++++++++++++++++++++++++++++++ ++++
Backup: FAR CRY PREDATOR INSTINCTS PAL-EU
Media: Verbatim 2.4x
Boot Direct
NO GO
++++++++++++++++++++++++++++++++++++++++++++++++++ +++++
All coasters.
Each game 'stealth checked' with 'xbox backup creator'.
However the fw boots games from other burners and retail originals np.
Where am I going wrong?
Can backups boot from OPA 2.1 with a NEC 4551A?
Please advise!
tb
Last edited by twobells; 11-02-2006 at 08:27 AM.
you did burn them with a DVD-rom booktype/bitsetting I hope?Originally Posted by twobells
If so, then I would say: no they can't
Last edited by bavelb; 11-02-2006 at 08:32 AM.
Yes I did, set it to 'media type: dvd+r dl' 'booktype: DVD-ROM' and when you interrogate the disk after burning it id's it as a 'dvd-rom'.
btw, thanks for the quick reply.
tb
Haveyou tried different programs? imgburn is my personal fave. Also try burning on 1x speed. The media you use should be perfect.
yeah tried imgburn :-(
and just tried a verb at x1,no go.
It MUST be combination of OPA 2.1 and the NEC4551A burner.
tb
Tried burning with samsung sh-w162l ts03
Media verbatim 2.4x DL+ and CloneCd
Games working well with Hitachi 47dj Maximus-Garyopa v2.3 Stealth
It should work. I originally had a DVR-108 and had problems with my initial burns. I got a 111D and had the same problems. I replaced my laser and all of my backups (including those made on the DVR-108) are working - so you should be fine with that drive. I use Verbatims primarily but also bought a 3 pack of Memorex to test (before I replaced the laser) and those seem to work as well (including burning on Memorex with the DVR-108).
Backup: Gears of War NTSC
x360: PAL-eu
Drive: Hitachi 47 DJ
Burner: 111D
Media: Verbatim
Bootup: .....yes!!! Direct!
Burner: Pioneer 110
Media: Verbs 2.4x
All pal
Fifa 07
tiger woods 07
call of duty 3
need for speed carbon
All work from cold start no probs, I was using clone but now use img burn.
Also made accident with my first burn using clone and did not set speed, it was set to max by default and still burnt N4S carbon at about 6x and worked
Well chuffed.
Sorry i also use the maximus-Garyopa v2.3 Stealth firmware with my Hitachi 47dj drive.
Last edited by Fussy; 11-07-2006 at 09:37 AM.
Posting Permissions
Reply With Quote