Originally posted by Atreyu yep there are 2 codes like you said.
ive entered the code 3 lines of code in the (M) and ticked the bootloader.
then when i START GAME it says open the lid then close the lid, when i close the lid it starts reading the disc and my screen goes off.. and disc keeps spinning.
i checked the memory card and all the files are there that should be there.
spcmnspff: could you please put me at ease, and use grab the 1.08 DOL and try it for yourself. or anyone else who was a proper AR disc that works for them and PSO, could they try. pleassssssse!
I just tried it and it works fines. It seems your memory card is not configured correctly. Your best bet would be to format the card you are going to use and then load a new AR card image to it. Then repeat the steps to get the gcos on it.
yep, i found you need a blank card. when i tried to delete all the files off an old one, samson's loader got written to the wrong place - ie rolling black screen of death.
i made a backup of my card with gcs, then filled the file with 0's in a hex editor. power up with lid open and gc asks to format the card. NOW update/reset with AR, and you're set for adding the bootloader.
ps- non-official memcards didn't work either. needed a nintendo 59 or 251.
pps - sure, GCOS works when booted off a memcard. why did they include gci then if not?!?!
Last edited by electronrancher; 03-07-2005 at 08:44 PM.
i formated my card and did the AR update and then did the loader.dol and then upped gcos.gci and then edited the master code of 'ACTION REPLAY' but i still get the same problem when i run AR from a dol or a backed up disc.
im hoping its the fact im running it from a dol or backed up disc that its not working.
I was having problems until I figured out I was trying to install an old version of the bootloader that I found. I have an AR v1.08 as well. Make sure you are using the most recent version, you can find it on the dextrose forums.
Originally posted by Bent I was having problems until I figured out I was trying to install an old version of the bootloader that I found. I have an AR v1.08 as well. Make sure you are using the most recent version, you can find it on the dextrose forums.
could you post the bootloader that you used please?
or a link to it?
Originally posted by The_Legend and how would I do to GCOS load without having to pass through the "SDLoad menu" or whatever it's called? I mean, the same thing someone did with the original anaconda04