can someone post AR/GCoSTeaser Raw image please?

[sickdrummer]

can someone please post a 59 block raw image of their memcard working with the new GCosTeaser? Im talking about the one that will boot with AR and for some reason i cant get it to work for me like 1.4 did.
thanks in advance

[klaus4040]

Here it is, my first try and working for me

have fun

[idbirch2]

Does anyone have an image of the revised 1.5 teaser? Judging from the time this first one was posted, its the initial release with the drive 6 issues.

Thanks!

[Paterchon]

My cube is tweaked.From 510 to 240-260Ohm.

Efal and Anaconda-Snake04 has the problems not.

GCOS 1.4 works great but more dre's then Efal,Anaconda-snake04.

my Pi/PO error Test is very good.

Is this a Problem of 50Hz/60Hz Problem by Pal Cube's?

I will try another method to copy the dol's on memcard.

Bye

[sickdrummer]

thanks for the post klaus!! anyone else should post different revisions here also I think to help the scene out in case people are having problems.
thanks again!

[cooky]

cool , that raw image works for me

Unfortunately its the first release

could someone make a raw image of revised version 2 to boot with AR?

I tried it but have no luck;(

Maybe its ur turn again Klaus?

would be cool

[spcmnspff]

It's not an image, but these steps worked for me:

Rename the teaser dol to level3.dol
Run dol2gci
Run ctr-gcs with the -r command and it will upload to memory card, cube will ask to overwrite so press A on the controller

I assume you know how to use ctr-gcs so I won't explain it further.

[klaus4040]

ok wasn't at home for some time, here is revised 2 raw image 59 blocks, have fun

[sickdrummer]

ok wasn't at home for some time, here is revised 2 raw image 59 blocks, have fun

thanks for the update klaus! gonna go try it now.

[idbirch2]

Yes, thanks so much for the update Klaus - very much appreciated! I found that the original teaser release was giving DREs and "An Error has occured" messages when initially booting a game, the revision 2 works much better.

[emu_kidid]

Great stuff, Thread stickied.

[sickdrummer]

man, i tried both of these, still always get dre at the start. ive also only tried mario golf. does anyone else have a problem with this game? im using a 08 drive and gcos 1.4 has always worked perfect for me. not that im complaining

[ildocteur]

I loaded this raw image to my original 59 block card and it works fine. I then weanted to copy the GCOS .dol file to a non original 251 block card i have, so that I can select either o boot the 1.4 .dol or the new dol at startup.

But when I ty to access the the 59 block card in the memcard manager it just says that the card is corrupt. Can someone suggest if there is a fix for this ?

My cube is a PAL model with drive 04.

ildoc

[spcmnspff]

It shows corrupt because if the way ctr-gcs writes data to the card. If the raw image did not originally come from your card, then it will read as corrupt.

Here is something that may help you.

[Nick101181]

I'm having a problem with this. I re-did my whole mem card with pso from scratch and put the revisied version 2 of the gcos teaser on it then tried to boot using the ar method. I'm getting a rolling black screen. I have the right codes typed in and everything. I had this working fine with gcos 1.4 but I wanted to try out this version as well. Any ideas?