can someone post AR/GCoSTeaser Raw image please?

[nukleuzdj]

i have an image for a 59 block card if anybodys intrested
it has:

anaconda
GCOS 1.4
GCOS 1.5 teaser 2
GCsim preview edition
and the NGC ripper (which doesnt seem to work, maybe because i compressed the dol?)

edit: attached the file in case anybody wants it

[nickbuhl]

SpacemanSpiff - I believe he means this thread.
(Thats firefox I hope it didnt mess up the link.)

psul.exe -i 192.168.1.100 "C:\gcmc\ctr-gcs.dol"

Now turn on the cube and start the PSO online game.
Wait for the connection to PC then type this:

ctr-gcs.exe -ir b ar_memcard_hack_1.14.raw

This was th old way I loaded my card. I read someone said use -r command, so that last line would now be ctr-gcs.exe -r b gcos_1_5_teaser_revised_2_59blocks.raw ? No? I don't even know what the -ir and b are for. But it worked

[klaus4040]

SpacemanSpiff - I believe he means this thread.
(Thats firefox I hope it didnt mess up the link.)

psul.exe -i 192.168.1.100 "C:\gcmc\ctr-gcs.dol"

Now turn on the cube and start the PSO online game.
Wait for the connection to PC then type this:

ctr-gcs.exe -ir b ar_memcard_hack_1.14.raw

This was th old way I loaded my card. I read someone said use -r command, so that last line would now be ctr-gcs.exe -r b gcos_1_5_teaser_revised_2_59blocks.raw ? No? I don't even know what the -ir and b are for. But it worked

b means: load to card in slot b and -ir means u load a raw-image (not a prog or savegame but a whole image of the card)

-r means retore backup/prog (maybe i misschanged this the first time so -ir is right)

EDIT: just saw i didn't write the -r thing ....

[Nick101181]

Thanks nukleuzdj. I was able to get your image to work. Just one problem when I try to use the ctr-gcs -r b whatever.gci command it tells me no free space on the card. I was wanting to replace that ngc ripper that doesn't work in the image for the new ninja2 bios and also add ctr-gcs to the card. why is it tell me the card is full? I was pretty sure the ar hack plus 2 or 3 dols only took up around 23 blocks on the card. if you have an image with ninja 2 bios and ctr-gcs with the dol menu, could you please upload it? thanks

[spcmnspff]

Thanks nukleuzdj. I was able to get your image to work. Just one problem when I try to use the ctr-gcs -r b whatever.gci command it tells me no free space on the card. I was wanting to replace that ngc ripper that doesn't work in the image for the new ninja2 bios and also add ctr-gcs to the card. why is it tell me the card is full? I was pretty sure the ar hack plus 2 or 3 dols only took up around 23 blocks on the card. if you have an image with ninja 2 bios and ctr-gcs with the dol menu, could you please upload it? thanks

Rename the dol you are going to be adding to the name of the dol you will be replacing. Then put it through dol2gci it will then ask to overwrite. The ninja2 bios is rather large uncompressed so it won't fit on a 59 block card, even by itself. When compressed it is still rather large, but you only have 512 KB to work with on a 59 block, so it will take up about half on its own.

[nukleuzdj]

Thanks nukleuzdj. I was able to get your image to work. Just one problem when I try to use the ctr-gcs -r b whatever.gci command it tells me no free space on the card. I was wanting to replace that ngc ripper that doesn't work in the image for the new ninja2 bios and also add ctr-gcs to the card. why is it tell me the card is full? I was pretty sure the ar hack plus 2 or 3 dols only took up around 23 blocks on the card. if you have an image with ninja 2 bios and ctr-gcs with the dol menu, could you please upload it? thanks

my image is pretty much full, you cant really fit a lot on a 59 block card, all dols are compressed too.

[DRK]

ok wasn't at home for some time, here is revised 2 raw image 59 blocks, have fun

Hmmm I was hoping that you can also make a 59 blocks image of the just released GCOS 1.5 teaser 3 since yours works like a charm for me!!!

Thanks in advance ...

[idbirch2]

Hmmm I was hoping that you can also make a 59 blocks image of the just released GCOS 1.5 teaser 3 since yours works like a charm for me!!!

Thanks in advance ...

Unlikely, as far as I can tell teaser 3 will not boot at all with the AR/memcard method. Hopefully this is fixed soon....

[test]

I have no idea how this all works, but loading a raw image works all the time.
Could someone post a image of teaser 3 for AR as soon it works.

thanks in advance

[klaus4040]

i'd really like to help u but i'm not at home (am at university) and i come home an friday evening (gmt +1)


if no other raw-image is posted then i'll do mine

see ya then

[DRK]

i'd really like to help u but i'm not at home (am at university) and i come home an friday evening (gmt +1)


if no other raw-image is posted then i'll do mine

see ya then

I have got it working over here. Here is the .raw I am using right now.

[klaus4040]

great, then i can lean back and have another beer and don't have to worry if it works at the others *g*

[DRK]

great, then i can lean back and have another beer and don't have to worry if it works at the others *g*

Since this raw image is based on your teaser 2 stuff I suggest you also take a beer on my account

[idbirch2]

I have got it working over here. Here is the .raw I am using right now.

Weird, your raw image works fine for me but when I copied the new T3 dol to my memcard it didn't. What method did you use for transferring you DOL to the memcard? I just converted the AR version of the DOL to a GCI and then uploaded it using CTR-GC (or whatever its called), replacing the T2 level3.dol.

This upgrade route worked fine when going from T1 to T2 so I can't understand why it didn't work for me.

[DRK]

Weird, your raw image works fine for me but when I copied the new T3 dol to my memcard it didn't. What method did you use for transferring you DOL to the memcard? I just converted the AR version of the DOL to a GCI and then uploaded it using CTR-GC (or whatever its called), replacing the T2 level3.dol.

This upgrade route worked fine when going from T1 to T2 so I can't understand why it didn't work for me.

That's indeed weird because I exactly did it the way you decribe?! (Did not compress the .dol btw)

I use the klaus4040 Teaser 2 raw image as my starting point, maybe your Teaser 2 configuration differs in some kind of way?