ModChipFactory

R4Depot

ModChipCentral - PS3

Results 1 to 2 of 2
  1. #1
    Join Date
    Mar 2007
    Posts
    11
    Total Thanks Given
    0
    Total Thanks Received
    0
    Total Thanked Posts
    0

    Fixing the PS2 Power Switch clicker

    I have a PS2 model SPCH-70012. After opening it up one day, I lost the clicker that makes it possible to turn on the PS2. I thought it was gone but today I discovered that the clicker was inside the console. Up until now I was using one of the rubber contacts from an SNES controller to turn it on but that is no longer working. It is black where the clicker was. Im thinking it got dirty and there is no longer a conductive surface anymore. I have pictures if you want/need to see it. Could I just clean it with rubbing alcohol and somehow reattach the clicker?


  2.                    
  3. #2
    Join Date
    Dec 2011
    Posts
    36
    Total Thanks Given
    0
    Total Thanks Received
    0
    Total Thanked Posts
    0

    Power switch ps2 fix

    It depends on whether it clicks or ''squishes''

    If you are handy with a soldering iron then just solder in a new push button drill a hole in the case and screw it to the front.

    If it has a click switch then just connect the two leads from the switch to where the old switch was connected.

    If it has a pad and squishes then you might be able to solder the pad.


    Alternatively, you could get a new case or button set of ebay

    Hope this helps!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.3.0