UPDATED: PS4 ESP8266 Xploit Host v2.0b2 By @c0d3m4st4

MeSonySpy · Apr 16, 2018

More PS4 Greatness using the little ESP8266 device as Webkit Exploit Loader setup!

It's only been five days since @c0d3m4st4 released v2.0b of his ESP8266 Xploit Host package and now he is back with v2.0b2 with some nice improvements as you can see in changelog below:

-20/04/2018- ESP8266XploitHost 2.0b2

Fixed 4.05 scroll issue with R1/L1 and reorganized menu.

Replaced Enable VR with HEN+VR in 4.05

Fixed stupid mistake with 4.05 xvortex payloads.

Updated HEN+VR to v2 in 4.55

-15/04/2018- ESP8266XploitHost 2.0b1

Added Holy Grail payload after many requests. Lots of not enough memory errors, but some say they don't get the issues they have with xvortex HEN. Moved all HEN payloads launchers to the first position of the list.

On PS4, you can use R1 and L1 to scroll thru the menu, no need to use the analog stick to navigate to the arrows (this works only in the “user guide”, as the PS4 browser already uses every button, so it will go crazy.

Updated list of “tricks” that may help to avoid the issues with xvortex in the “Known issues” section in the manual.

Added PS3 exploits from www.ps3xploit.com . Please refer to the site to check if your console is supported. Tested all the HAN process on a 4.82 OFW slim console, and works great. I didn't play with the flash dumping or writing options (be careful with the flash writing options as NOT every console is supported). Refer to the site for the needed files to place on the USB drive for installation. Delete cache an cookies in the PS3 browser for better results. Connect to the ESP8266XploitHost access point, then open the browser. If you didn't touch default settings, you will be redirected to the host automatically, if you changed the start page, you may need to enter host IP address (13.37.13.37) to access the menu.

Added Nintendo Switch exploit to install HB launcher. Please refer to https://switchbrew.github.io/nx-hbl/ for installation guide. Works on 3.0 only, so it is mostly untested... i'm on 2.0 and everything works as expected. I got until the “unable to pwn sdb” error, which is normal as it only works on 3.0, so it should work well, please report any error. To launch the installer just connect to the ESP8266XploitHost access point, and you will get redirected to the installer.

Also added automatic redirection to the correct exploit pages. No more firmware selector on PS4, if you connect with a PS3, the PS3 menu will be shown, if you connect with a Switch, you will get redirected to the HB launcher installer, and finally if you connect with a PC or smartphone, you will get redirected to the tools menu (tools menu is for PS4 only, credits and info, you can still upload any file tho).

Click to expand...

If you enjoy @c0d3m4st4's work please consider donating for future updates or testing new boards. You can do it here. Thanks in advance

NEWS SOURCE: ESP8266 Xploit Host v2.0b2 (via) PlayStationHAX

UPDATED: PS4 ESP8266 Xploit Host v2.0b2 By @c0d3m4st4

MeSonySpy Clean-Up Crew

Attached Files:

c0d3m4st4_ESP8266XploitHost_v2.0b2.zip

Comments

Share This Page

UPDATED: PS4 ESP8266 Xploit Host v2.0b2 By @c0d3m4st4

MeSonySpy Clean-Up Crew

Attached Files:

c0d3m4st4_ESP8266XploitHost_v2.0b2.zip

Comments

Share This Page

Useful Searches