hit tracker

Announcing SX GEAR - Your Best OS Companion!

Discussion in 'Underground Nintendo Scene' started by ub3r1337, Jan 2, 2018.

By ub3r1337 on Jan 2, 2018 at 4:06 PM
  1. 138
    48
    28
    ub3r1337

    ub3r1337 NFC-Bank Owner Staff Member Clean-Up Crew MaxConsole News Team

    Joined:
    Jul 2, 2015
    Home Page:
    NEWS UPDATE - August 17th: TX Announces New Addition To Their SX Family - SX GEAR!
    [​IMG]

    TX is adding more products to their SX Family, now they are offering SX GEAR, check out their official PR details below:
    --< Team-Xecuter - Rocking the Switch in 2018 and beyond! >--

    (What follows below is previous TX announcements, click each 'Spoiler Tag' to see all the details in full.)
    Another day, another small update with some convenient new functionality for SX OS!

    Lets have a look at whats new:
    • Added mass NSP install (and optional delete) functionality
      Users who want to install a lot of NSP titles at once can now easily do so by pressing [Y] in the installer tab. Upon finish the NSP installer will also ask you if you want to delete the NSP source files from your microSD card, freeing up space and keeping every neat and tidy!
    • FTP server support
      You can now enable a FTP server from the options tab in our menu that will keep running even once the menu is closed. This FTP server gives direct access to your microSD card, so you no longer have to eject the card to store/retrieve files.
    • More content directories
      Some people complained that they didn't like all the XCI/NSP/NRO files in the root of their SD card. We have to agree that becomes a bit messy, so the menu will now scan the following directories as well looking for game content:
      • /sxos/games
      • /sxos/xci
      • /sxos/nsp
      • /sxos
      • /switch/games
      • /switch/xci
      • /switch/nsp
      • /switch
    We hope you enjoy this release!

    Once again we would like to thank everyone for their suggestions and their support.

    More exciting functionality for all of our end-users is being worked on as we speak. Hang in there with us, your loyalty will be rewarded!
    Dear fans, we hope you're all enjoying your weekend!

    Recently, it has come to our attention there's a new revision of the Nintendo Switch in the wild which is incompatible with our SX Pro product. This isn't simply an incompatibility with SX Pro but rather appeared to be a fix of the infamous "USB RCM" exploit.

    Naturally, we had to locate one of these new Switch units to get to the bottom of this. Our new Switch unit arrived to us at firmware version 5.1.0 and what we found out is the following (sorry, time to get a bit technical):

    One of the IPATCH entries in the fuse set (entry #3) has been replaced with a new patch. The old patch patches the bootrom location 0x10fb3c with the value "00 20" (mov r0, #0 in thumb), and the new patch patches the bootrom location 0x10769a with the value "00 21" (mov r1, #0 in thumb). This new patch effectively zeroes out the upper-byte of the wLength field in the USB RCM endpoint 0 handling code.

    Those who are paying attention probably wonder how we know the exact details of this IPATCH entry change, since we can't read out the fuses without our precious USB RCM exploit, right? It is a classic chicken and egg problem.

    The answer is obvious: There is more than one coldboot bootrom exploit, and it is not just the warmboot one.

    So don't fear: we will deliver a solution for these new "unhackable" switches in due time!

    Thank you for attention.
    Good day, loyal users!

    While we chip away at many different features for SX OS and additions to our SX hardware family we took a break to prepare an update for SX OS with some exciting new functionality and outstanding bug fixes.

    Let's have a look at what's new and fixed in this release:
    • Integrated NSP installer
      With our last update we introduced the possibility of installing eShop NSP titles. However, this relied on using external tools and wasn't very user friendly. In this release we bring our own integrated NSP installer as part of our menu system. This is the neatest and easiest way of installing NSP titles, enjoy!
    • Integrated homebrew launcher
      Launching homebrew used to be done by launching NX HBMenu by holding R when entering the album. While we kept this possibility (mostly for developers), you can now also launch your favorite homebrew directly from our own menu!
    • IR / motion plus issue fixed
      A few games (like 1-2-Switch and Resident Evil) were suffering from freezes when enabling the joycon IR camera or motion controls.
    • Allow unsigned NCA
      People asked us if we could get rid of the NCA integrity checks, so we did! Custom NCA files, modified NCA files and repackaged NCA files should all work fine now.
    • Display SX OS version in menu
      To better distinguish the different versions of SX OS we introduced a small version number display in our menu.
    • LayeredFS fixes for 4.1.0
      There were certain issues with 'LayeredFS' for people on firmware 4.1.0. If you use 'LayeredFS' on that specific firmware there's good news for you: these issues have been identified and fixed!
    And that's that for this release. We have quite the backlog of feature requests and todo's on our plate, but trust we'll get there!
    We are back once again with an exciting update for SX OS. Let's skip the drama for now and jump straight to the list of new goodies:
    • Add LayeredFS support
      Are you excited about any upcoming Game Mods for switch games? Well, we are! To accommodate this we have added what is commonly referred to as "LayeredFS" support. In short what this allows you to do is override specific files from a game with modified copies that are loaded from your microSD's (ex)FAT partition.
      Place your custom game files under the following locations on the microSD root:
      - /sxos/titles/<titleid>/exefs/
      - /sxos/titles/<titleid>/romfs/​
      We can't wait to see what cool mods the community will come up with!
    • Add eShop NSP support
      This adds support for installing and launching installed eShop NSP files. This is still rough around the edges and for advanced users only. To install NSP files you need a legitimate copy of the DevMenu, which can be launched currently via LayeredFS. We are still working on adding a custom and easy to use NSP installer to our own menu system. Stay tuned!
      WARNING: We do not recommend playing online with installed eShop NSP games without a valid ticket, as this WILL lead to a console ban without a doubt.
    • Add low battery reconfiguration on bootup
      Some users were having battery issues after playing around with Switch Linux custom payload. This fixes the "battery desync" issue every time you boot your switch. If you weren't use Switch Linux there's nothing to worry, otherwise; enjoy your penguins AND enjoy your horizon OS! :D
    • Hide OSX Temp files in game selection menu
      If you were pestered by bogus entries in the game selection menu chances are high this is because you are using OSX (and Finder). We simply hide those files from the menu now. All cleaned up!
    • Removed eMMC password lock
      It seems a perfectly safe and easily reversible hacker challenge we put in place for aspiring hackers has been blown out of proportion. We are sad to see so many false claims on the internet and to avoid any further false accusations and 'fake news' we decided to get rid of it. Namaste.
    That's it for today! We'll be back soon. Team-Xecuter doesn't take a break. While others moan on social media we work day and night to bring you the best experience on Nintendo Switch.
    It's been a busy week at the Team-Xecuter headquarters, after releasing v1.1 of SX OS we got (yet again) a good amount of feedback from the community.

    Let's jump straight into the changes for version 1.2 of SX OS:
    • Added Card2 support
      A small dozen (currently released) games were not compatible with SX OS, we tracked down these incompatibilities with these so-called "CARD2" games and fixed them. You can now fully enjoy `Sushi Striker' and other games!
    • Added downgraded fuse support
      In v1.1 we added a protection against programming fuses. What was not added was a bypass for the "fuse checks", this has now been addressed. Advanced users who want to enjoy "downgraded" firmwares can now do so!
    • Improved homebrew compatibility
      Without going into complicated details, homebrew compatibility has been improved once again. Give your problem homebrew titles another spin, and let us know if any problems remain. We're sure this should be a big improvement.
    As always, updating SX OS is simply a matter of replacing "boot.dat" in the root of your microSD card. No need to re-activate your license or anything.

    Stay tuned for more updates. We're far from done!
    We've had an tremendous amount of positive feedback following the release of SX OS! So today we bring you a small update to SX OS.
    Simply replace boot.dat on your microSD card with the one from the SX OS v1.1 zip file to complete the update. File can be downloaded from: https://sx.xecuter.com/

    What's new in this release?
    • Improved homebrew compatibility
      We've had reports of some homebrew not running at full speed or not working at all, these issues have been resolved. As you're probably aware, you can enjoy homebrew with SX OS for FREE! (without a license)
    • Added fuse burn protection
      Some people are worried about burning their consoles' fuses, preventing downgrades and possibly hindering upcoming emuNAND support. To put these minds at ease we now prevent these fuses from burning.
    • Support user cert in XCI
      To play online your game (XCI) files need to have a unique certificate embedded. We now properly emulate these certificates, so dumps that have them embedded will be able to play online! Beware though, it is *not* advised to share a certificate with multiple people. Your best option is to make a backup of your own cartridges for the games that you want to play online. A way to do this currently is using WAIN v0.0.3, which can be found here.
    In the future we will add our own user friendly cartridge backup functionality to SX OS.

    That's it for now. We have much more coming for our userbase (CARD2 anyone?) and we hope you're all enjoying SX OS. Finally, we want to apologize to the people who are currently anticipating the arrival of their SX Pro... It will be worth the wait though!
    SX OS is a custom firmware that can be used with the SX Pro tool kit (strongly recommended for ease of use and safety) or for advanced users as a stand alone OS.

    Once you download SX OS from our website, please follow the basic tutorial also available on the same page to install it on your Nintendo Switch. A complete tutorial and advanced manual will be available in the days to come.

    If you did not purchase a SX Pro or a SX OS license, Team-Xecuter still provides FREE homebrew support and loading from a non activated SX OS install. This is a small gift to all 'sceners' who are only interested in homebrew. After all, Team-Xecuter also comes from the homebrew scene and after all these years, we are still glad to contribute now and then to this scene who brought us where we are now.

    To unlock ROMs loading and more advanced functions, you need to purchase a SX Pro – our top selling product – or SX OS license. They are available from resellers worldwide. A list of trusted distributors can be found HERE.
    • If you did purchase a SX Pro, then your license is included in your dongle. Simply follow the instructions from our quick tutorial.
    • If you purchased a SX OS license, then once your vendor email it to you, please use it and follow instructions from our quick guide to activate it.
    OK, we know you are eager to test it out, so we will stop here. SX Pro and SX OS are a year in the making. It required massive team work from all of Team-Xecuter members to reach this V1.0 we believe will be your best purchase on Nintendo Switch.

    As usual here is a few Q&A for the early SX OS users that have already downloaded our SX OS:
    • Q: How do I re-enter TX boot menu
      A:
      Press and hold vol+ and keep holding until you see the TX splash screen
    • Q: How do I access my albums while in SX-OS CFW mode ?
      A:
      Hold down L while opening album
    • Q: How do I access HomeBrew ?
      A:
      Hold down R while opening album
    • Q: How do I load my backup roms ?
      A:
      Simply enter album an select you rom file, all rom files should be placed in the root directory of the console micro SD
    • Q: HomeBrew menu loads but none of my apps are showing, what is wrong ?
      A:
      Please try re-format the micro-SD card using a windows machine, we have encountered this issue when using OS-X ex-fat formatted cards.
    But as usual, it is a work in progress. We received a lot of requests for new features to be added in future updates, and our skilled developers are already working on it even as V1.0 is only being rolled out.

    We really value your purchase, and we will do our best to bring you the best new updates and features in the years to come.
    As we spin our chairs, and refresh the browser screen looking for updates on tracking and SX OS going live, we decided to stop by earlier at the Team-Xecuter headquarters to bug them one last time before the review samples arrive.

    [​IMG]

    And they gave us permission to take a few exclusive photos of their very busy shipping section that is non-stop 24/7 getting batches of SX PRO out the door to all the various official resellers around the world, so that everyone can soon be enjoying the very latest in 'backup games' and 'homebrew' on their Nintendo Switch console, or even just booting-up Linux if they decide to go that more advanced route of enjoying their Switch being now fully unlocked with unlimited possibilities, so as we all wait for our SX PRO to arrive in the next few days, we can take a look at these nice photos below:

    mass1.jpg mass2.jpg

    mass3.jpg mass4.jpg

    mass5.jpg mass6.jpg

    mass7.jpg mass8.jpg

    mass9.jpg
    Welcome to the last Team-Xecuter announcement before we let the reviewers take over!

    Please find final product & packaging pictures with this announcement. This is from one of the 100 review samples that will be shipped this week. If you are on the review copies list, you do not need to email us: We will send you tracking once shipped.

    For reseller information, the packaging dimension and weight with product and cable: Weight: 30g. Dimensions: 10*7*1.4cm

    We want to confirm that SX OS official launch date is June 15th. Remember this is the day we ship units to vendors, so your own tracking number from the reseller will be a few days later. Also, because this is very large product launch, we can't deliver all preordered units on D-day. If you placed your order late, you might have to wait a week more for your distributor to receive more stocks after he clears its first preorders.

    We are working 24/7 right now to make the delay to deliver all preorders as short as possible.

    As usual, a few Q&A that came back regularly:
    • Q: Is SX affected by the dreaded "battery desync" problem?
      A:
      As far as we are aware this battery desync problem currently only occurs when running Linux on your Switch.
      While extensively testing SX OS, including booting SX OS with AutoRCM we have not ran into a single battery desync issue ourselves.
      SX OS itself isn't based on Linux. We *do* allow people to run Linux (and other payloads) through our "external payload" functionality. This is at your own risk.
      If we had to give the community a hint as to where to start looking into this "battery desync" problem we'd suggest looking into how the Fuel Gauge IC (MAX17050, I2C1 addr 36) is being used by Nintendo's OS and by Linux.
    • Q: If I boot in OFW mode and play my original purchased game online, am I safe?
      A:
      Yes, you are safe to play original games online in OFW mode.
    • Q: Does SX OS plays the original games in CFW mode?
      A:
      Yes, it does.
    • Q: If I download eShop games to an SD card, can I also run SX OS on that card?
      Or do I need separate cards for Nintendo eShop games and SX OS games?
      A:
      You can use the same SD card.
    Next week, the first reviews will be online, we are sure they will be excellent as we expect!
    pack_1.jpg pack_2.jpg

    pack_4.jpg pack_7.jpg
    Welcome to one of the last Team Xecuter announcement before we let the reviewers take over!

    As promised, here is a new video of our latest SX OS running games and homebrew under 5.1.0. This is pretty close to what you will have in the V1.0 of SX OS. But we are still working...

    As a quick fact update, during our latest tweaking before launch, we now have 10 (instead of original 5) successive boots without the opportunity to auto recharge. Standby time remains the same (approximately 1 week) and battery drainage has been dropped from 25mA to 13mA while console is awake and dongle plugged in.
    • Q: Can I play my Switch running SX OS while being docked?
      A:
      Absolutely. You just need to have it undocked when you power up your Switch to load SX OS. Once done, dock it and play for as long as you don't completely power it off again.
    • Q: I know I'm asking too much and it's early, (sorry) would it be possible to get Bluetooth audio (or even Bluetooth controller) support within the CFW.
      I know a lot of people would dig that on other forums (including a clean internet browser that has YouTube unblocked) if this is possible?
      A:
      If it is doable, we will try. Please read text below about such requests, you are fully entitled to request anything, we will do our best in order of user's most wanted features.
    We receive hundreds of email daily with hundreds of request/suggestions. We thank you for them. We do not reply to everyone, although most people do receive a reply, but rest assure we read them all. And we take note. We have requests for emunand, Nand back up, themable SX OS, soldered version... the list goes on!

    SX OS and its affiliated products (first one being SX Pro) are a work in progress. You paid not only for a device but also for support. And we will bring it to you. Most on demand or important features will be added first, some are already being worked on as you read this, and we will take it step by step.

    Thank you for the trust you placed in us, we will deliver!
    The clock is ticking and we are getting closer to Xecuter SX line launch date.

    We wanted to share some of the pictures of the first units coming out of our assembly lines and of the packaging for SX Pro. We are very satisfied with the product quality and we are certain you will be as well. We will have some video and maybe another announcement coming and then it will be TIME!

    Before we leave you, our usual Q&A to your most popular questions.
    • Q: Is SX OS compatible with firmware 5.1.0
      A:
      Of course. And as we stated before, it will be compatible with the next updates as well. We are offering a future proof solution.
    • Q: Will the SX OS for people who bought it 'stand alone' be delivered before the SX OS for people who bought SX Pro?
      A:
      Not necessarily. SX Pro will be shipped in the days to come to distributors. SX OS will be unlocked a bit after the reviewers get their units (all reviewers receive SX Pro).
      So depending on the speed of delivery to your distributor and then to you, SX Pro could come before SX OS stand alone. It probably will be very close.
    • Q: Why is there - and + symbols engraved in the SX Pro dongle?
      Since USB-C devices can be plugged in either way, people are worried if dongle plugged in upside down, the + on left and - on right, and SX label facing down, that the Switch will blew up or get bricked, etc.
      A:
      They are here just for cosmetic reasons. The - symbol is also the LED window.
    • Q: Yikes, those are two huge caps in render picture? Is that going to taser my Switch, damage my system, or zap me!
      A:
      Super Cap’s actually (super-capacitor), 0.35F 2.7V, given the transport issues with Lithium based batteries SuperCap’s are fast becoming the go to temporary power source.
      No zapping ( very low voltage ) and we limit the charge current to ~400mA peak for either USB port.
    • Q: Huh, two caps, how do they get 'charged'? Do I have now and then plug my dongle into micro-USB cable to charge it, what happens when it runs out of power? -- Why not battery instead? -- Does it instead drain my Switch battery, what happens if I leave it plugged in.
      A:
      The SuperCap’s are charged from either usb port ( USB-C or Micro USB ). The caps offer approximately 1 week standby time with enough energy left for one boot, or at least 5 successive boots without the opportunity to auto-charge. Charge to 80% is achieved (automatically) within 1-2 seconds of entry into the Nintendo start menu. We are working reducing that considerably … (see above for why not battery). Because we are powered by s-cap’s we have a very power conscious design.
      Leaving the dongle in the console for more than a minute is pointless but will do no harm in any way to the dongle and drain very little battery ( currently we draw ~25mA but will work on reducing that considerably after ~1-2 minutes charge mode).
    • Q: Can I charge my Switch via dongle?
      Using just micro-usb cable, removing the need of needing a proper usb-c cable.
      A:
      Sadly no, our intent for the micro USB port was for charging the dongle and firmware updates, but might be something we will consider for future hardware revisions, thanks.
    • Q: There been reports of cables, and docks without that bricked the battery charging circuit, are we at risk with SX Pro solution?
      A:
      No, simply because we do not support charging. The dongle uses both USB ports only for receiving charge.
    • Q: Is TX coming up with solution for those that leave their Switch always 'docked'?
      Its nice, that is portable, but some users never go 'portable', they are DOCK only fans, what about them?
      A:
      If the demand is there, it is something we can develop.
    pic2.jpg pic3.jpg

    pic1.jpg pic4.jpg

    pic5.jpg
    We are proud to introduce our Xecuter SX dedicated 'mini' site. You can find it HERE.

    This site is not meant to replace our Xecuter portal, but exists for the convenience of (future) SX (OS) users. On the mini-site you can find high resolution pictures of the SX Pro, screenshots of SX OS and our brand-new game selection menu and a basic usage guide.

    The SX OS download is not available yet. It will be once we deliver the first licenses to our resellers on June 15th.
    • Activation of SX OS can be done through SX OS itself if you have WiFi configured on your Nintendo Switch.
    • If you don't have WiFi configured you will be able to retrieve your SX OS License through our website.
    • If you purchased SX OS only you will receive a "redeem code" that you need to enter (not needed for SX Pro users).
    Finally, we'd like to address some more questions that we've seen a lot.
    • Q: Will Switch data such as savegames and updates be shared between the OFW and SX OS? Or are both systems separated?
      A:
      Yes, SX OS and the original Switch OS share savegames and update data.
    • Q: Is it possible to play games from a External Harddrive?
      Does SX allow us to use an external disk using the docking station or USB-C port?
      A:
      This is a possibility in the future, we've added it to our to do list. (thanks to all users for making it already a few pages long :)
    • Q: Can we expect cheat codes some day?
      A:
      Cheats has always been a priority for our us. And we've already started looking into it.
      It takes a while to make a decent and usable cheat system, your patience will be rewarded!
    • Q: There has been a wave of bans happening lately. Does that confirm we won't be able to play online with SX OS?
      A:
      There have indeed been a number of isolated ban incidents happening lately among some homebrew developers. The exact cause of these bans is not known as of yet.
      We are not aware of any bans due to SX OS usage. But be cautious and use online functionality at your own risk!
    Thanks again to everyone who is supporting SX. We will keep you posted with updates. And we hope this will make the wait until the official launch a bit easier for you!
    Welcome back to another Team-Xecuter SX Question & Answer.

    As you can see in this second Q&A, which answers some requests from customers, a lot of features are coming in future updates.

    All your requests are welcome. Please email [email protected] with your suggestions/features ideas, if they are technically doable, we will add them to our development to-do list.

    SX Pro (and SX OS) is a fantastic product as it is, but it will only get better over time with all the improvements our development team will bring you, free for life with your SX OS license.

    To demonstrate that, you can see below our first Q&A, which has been corrected since our first one a a few days ago, and will delight our favorites advanced/geek users with their favorite feature (after ROMs, although they will never admit it :)
    • Q: Can SX products run homebrew software as well?
      A:
      The initial release of SX OS will have support for running homebrew software for all firmware versions.
      In the initial release, launching the homebrew menu can be done by starting the photoviewer application while holding the R button on the Joy-Con. A file called "hbmenu.nro" needs to be on the root of the microSD card and a folder "switch" needs to contain all the homebrew applications.
      We will naturally continue to improve homebrew support and easy of use in future update.
    • Q: When you put your Switch into Sleep mode, do I need to insert dongle again upon waking up?
      A:
      No, you don't. Just resume playing where you left it :)
    • Q: Is it possible to install Game Updates (and does it requires to be on the latest firmware)?
      A:
      Yes, you can install game and system updates. The game updates can be applied following Nintendo's usual rules, which sometimes requires you to be on the latest or a higher firmware than your console's current firmware.
    • Q: If a game runs natively on an OFW x.yy and above, can SX OS run the game even if the console has a lower firmware?
      A:
      Currently no. We have added that request to our list of features to look into.
    • Q: Does SX OS supports online gaming?
      A:
      SX OS supports playing online. However, we can't guarantee Nintendo is not able to detect you are using SX OS.
      So playing online is at your own risk.
    • Q: Can I buy one SX Pro and one SX OS license separately, and use the dongle and tool with two switches?
      A:
      Yes, you can buy additional SX OS Licenses and use one dongle and tool for all your Switch consoles.
    • Q: Which file format does SX OS support? What about split files?
      A:
      We support both FAT32 and exFAT.
      SX OS will also try to look for split files in the form of "filename.xc0" "filename.xc1" "filename.xc2" and so on to support ROMs larger than 4GB on FAT32.
    • Q: Does SX OS support Emunand?
      A:
      Currently it doesn't. This is a feature we can add in the future, but it is low in the priority list because of the small interest to the general public. But because Xecuter SX is also used by advanced users, we will add Emunand support at some point.
    • Q: Can I backup my games with SX OS and create my own game ROMs?
      A:
      Currently there's no easy way to backup games with SX OS. We will add support for this in an update.
    • Q: Will you allow the use of different payloads?
      A:
      We will allow it. Custom payload can be put on the microsd card. Details will follow.
    • Q: How much space is used up on microSD for SX OS?
      A:
      Only 16MB. To clarify, our OS will not alter in any way your microSD game & homebrew capacity.
    Again, we hope this clarifies most of the questions the hundreds of thousands of Xecuter Switch users are asking. Please continue to mail us all your questions, requests and suggestions. Customer's satisfaction is our #1 priority. We will keep supporting you with the best update, and the best updates will come with your help.
    Please find below a brief Q&A that will answers the most commons questions that our technical support has received so far. Xecuter SX OS and products are fully updatable. This is reflected in some of the Q&A below.

    We will support this product through the lifetime of the Switch with regular updates that will bring more features, ease of use and functionality to SX OS and the SX hardware product range. But lucky day 1 users will be delighted with the initial software features.
    • Q: Can I update my Nintendo Switch to the latest firmware?
      A:
      Yes, you can. We are compatible with all firmwares and all regions!
    • Q: How are game ROMs launched? What format do they need to be in?
      A:
      Games ROMs available right now from release groups are compatible as-is.
      Copy the XCI files to the root of your Nintendo Switch microSD card so SX OS will be able to find them.
    • Q: How does the tool (jig) and dongle operate? Are they needed everytime you turn on the console?
      A:
      If you don't want to make any (software) modifications to your Switch Console, both the Tool (jig) and dongle are needed every boot.
      SX OS has an optional "AutoRCM" feature that can be installed to your Switch Console such that the jig tool is not needed anymore on boot.
    • Q: How does the AutoRCM feature work?
      A:
      The AutoRCM feature makes a tiny modification to your system's on-board storage via software, and from there on you will ONLY need the dongle (and won't have to press the volume key) when booting your console.
      Please note: With the AutoRCM feature installed, your Switch will only boot up with the SX Pro Dongle inserted or by any other USB-C launching method currently available. Once booted, you can always uninstall AutoRCM through SX OS.
    • Q: Is the license for life and updates included?
      A:
      Yes, it is! All updates are free and for the lifetime of your console.
    • Q: Is SX OS tied to my console/dongle?
      A:
      Yes. In case of SX Pro the license is tied to your dongle and console. In case of SX Lite the license is tied to your license code and console.
    • Q: Can we play eshop games?
      A:
      The current version of SX OS only allows to play cartridge based games. But we're working hard to bring game titles that originate from different distribution media to SX OS as well! It is on our list of features to add in upcoming updates.
    • Q: How will SX OS work?
      A:
      The SX OS boot file and licenses can soon be retrieved from our easy to use website that will launch shortly. Simply follow instructions and you will be set up in a few minutes.
    • Q: What do I need if I only buy SX OS?
      A:
      We strongly recommend buying SX Pro for the ease of use and safely streamlined procedure. That being said, SX OS standalone can be launched from Windows using TegraRcmGUI (TegraRcmSmash) or from NXLoader on android (with a USB-otg adapter).
      We offer support & warranty on your devices, please note any issues you face by errors/misuse of other methods will not be covered by our warranty.
    • Q: Will SX Pro work with Switch Linux?
      A:
      We will release a method of (chain)loading Linux using your SX Pro dongle soon.
    • Q: Do we need to use the L/R buttons on the Joy-Con to switch game ROMs?
      A:
      We are working on a more user-friendly menu that can be launched from the home menu.
      We already have a working menu prototype that is fully functional but we are still improving it for our audiences.
    • Q: Can SX products run homebrew software as well?
      A:
      The initial release of SX OS will not have support yet for running homebrew software for all firmware versions. Currently only the standard method for installing homebrew is supported, which means limited to the specific firmware version 3.0.0.
      We are in the final stages on adding support for running homebrew software regardless of firmware version and we expect to have this included with one of the first SX OS updates.
    Team-Xecuter is delighted to announced the first 2 products in its Nintendo Switch SX Line: Xecuter SX Pro and Xecuter SX OS

    You will find below a brief description for both products. More details and pictures will be released in the days to come. We have started preorders, RRP pricing is listed below. Production has started and at current preorder volume, all preorders will be delivered by June 15th. The earliest birds will receive their unit/copy a bit before that date.

    You can find a list of resellers HERE. We will add more resellers in the days to come, meanwhile, if your country is not listed, our partner AxioGame.com delivers worldwide with free shipping.

    Xecuter SX Pro
    Attachment2.jpg
    Description:
    • The ultimate kit for your Nintendo Switch!
    • Includes: USB dongle, tool (use once to install OS) and OS software license.
    • Compatible with all regions.
    • Compatible with all firmwares.
    • Real time game switching.
    • More features to be announced soon.
    • Weight: (50g)
    RRP: $34.95 (excluding shipping cost & local taxes when apply)

    Xecuter SX OS
    Attachment1.jpg
    Description:
    • Xecuter SX OS software license
    • Requires: Tools to be installed on your Nintendo Switch
    • Compatible with all regions.
    • Compatible with all firmwares.
    • Real time game switching.
    • More features to be announced soon.
    Only $24.95 (excluding local taxes when apply)
    BTW, IF LOOKING FOR A XECUTER SX PRO PRE-ORDER, PLEASE CHECK OUT THESE OFFICIAL SPONSORS OF MAXCONSOLE:
    1. 3DS-FLASHCARD --> https://3ds-flashcard.com/home/77-xecuter-sx-pro-with-sx-os.html
    2. MODCHIPFRANCE --> https://modchip83.com/en/home/178-purchase-xecuter-sx-pro.html
    3. SWITCHSX.COM --> https://www.switchsx.com
    4. SHOP01MEDIA --> https://www.shop01media.com/index.php?route=product/product&product_id=2199?tracking=55d384d869281
    OR CHECK OUT THE FULL LIST OF OFFICIAL RESELLERS ON TX's SITE: --> https://team-xecuter.com/where-to-buy/
     

Comments

Discussion in 'Underground Nintendo Scene' started by ub3r1337, Jan 2, 2018.

    1. 4
      1
      3
      Anderson87

      Anderson87 Loyal Member

      Joined:
      May 20, 2018
    2. 5
      0
      1
      BaByGr00t

      BaByGr00t Loyal Member

      Joined:
      May 17, 2018
      Hi Guys, does any know is it possible to install Devmenu on xecuter os 1.4? If is possible may i know how?
       
    3. 70
      6
      8
      ISOHaven

      ISOHaven Loyal Member

      Joined:
      Apr 21, 2005
      Home Page:
      Can you be using game.xci and update it with update.nsp? Or do I have to ditch the xci and move over to the nsp version of the game? More so, would the save be compatible?
       
    4. 192
      38
      28
      LupinIII

      LupinIII Developer

      Joined:
      Aug 21, 2005
      It's definitely possible. 1.4 still has LFS support. So, you can just do it the same way as on SX OS 1.3. Using LFS and Pokemon Quest (or any other installed title you want to manually set it up for, but it's preconfigured for PQ). There is also one preconfigured for Hulu if you prefer (it's being distributed by the person that released Atmosphere with sig patches). There is an NSP out in the wild, but there are issues supposedly. Specifically, I've heard that it corrupts your master keys or something, which then causes all of your games to stop working. You might want to backup your eMMC with Hekate first if you decide to go there (it's never a bad idea).

      Updates and DLC work just fine with XCIs (as long as they're for the same region). I've had the Zelda and XC2 DLC working with the XCIs of the games for a while now.

      Your saves should work with both the XCI and NSP as long as the title ID is the same (same region). If not, you may still be able to convert the save by dumping it with Checkpoint and copying it to the other region's folder (either by taking the card out and doing it on a computer or via NxShell). I recently migrated my BoI:A+ save from the EUR verion to the USA version and it works just fine (I normally don't care which I have, as long as it's in English, but I figure Nicalis will roll out booster packs 4 and 5 faster than that company maintaining the EUR release). Though as I said in the previous paragraph, you don't need to switch to the NSP version of the game.
       
      Last edited: Aug 4, 2018
      ISOHaven likes this.
    5. 1
      0
      1
      SwitchSX23

      SwitchSX23 Loyal Member

      Joined:
      Aug 7, 2018
      If anyone's looking for an instant SX OS code you can try appledrunk.net, they deliver immediately.
       
    6. 70
      6
      8
      ISOHaven

      ISOHaven Loyal Member

      Joined:
      Apr 21, 2005
      Home Page:
      Anyone hear/read anything about the status of a cheat engine?
       
    7. 70
      6
      8
      ISOHaven

      ISOHaven Loyal Member

      Joined:
      Apr 21, 2005
      Home Page:
      Nice new features on v1.5 but man....super bummed there's no talk or anything about a cheat engine.
       
    8. 25,088
      2,188
      113
      GaryOPA

      GaryOPA Master Phoenix Admin Staff Member Top-Dog Brass

      Joined:
      Mar 18, 2006
      Media:
      1,018
      Occupation:
      Design Eng.
      Location:
      Tropical Island
      Home Page:
      If you have not noticed yet, the first post has been updated with release of SX v1.5
       
    9. 22
      0
      1
      Starjudy1990

      Starjudy1990 Loyal Member

      Joined:
      May 24, 2018
      With ftp being a sys-module, this raises a few questions...(got my pro yesterday from 3DS-Flashcard site and just started using it)

      1) Can you upload data to Mirco SD card while playing a game? If so, are xfer speeds affected while uploading and playing at the same time? If not, does FTP transfer pause while playing a game and then resume when you exit game and is it automatic? Or is the upload interupted, and you have to manually reinitialize the upload again?

      2) Can you write from the Micro SD Card to the PC or is it a 1 way transfer (PC to Mirco SD card)?

      3) Will the Switch auto sleep function trigger while transfers are active via ftp?
       
    10. 42
      1
      8
      Jimyb3

      Jimyb3 Loyal Member

      Joined:
      Mar 29, 2018
      The SX gear is like pro without the os right?
       
    11. 25,088
      2,188
      113
      GaryOPA

      GaryOPA Master Phoenix Admin Staff Member Top-Dog Brass

      Joined:
      Mar 18, 2006
      Media:
      1,018
      Occupation:
      Design Eng.
      Location:
      Tropical Island
      Home Page:
      Yes, basically designed for those already owning SX OS and now wishing to have 'dongle' to use it with.

      Or those wishing to not use sadly TX wonderful perfect SX OS and instead use the 'dongle' just for linux, or other 3rd-party payloads.

      It has to be done to keep up with changing marketplace, as Free CFW's are getting better, and other companies like R4S are in the Switch game now offering up 'dongles' for payloads without any CFW or bundled OS.
       
      Jimyb3 likes this.
    12. 22
      0
      1
      Starjudy1990

      Starjudy1990 Loyal Member

      Joined:
      May 24, 2018
      upload_2018-8-18_9-28-17.png
      Sky-3ds.com can pre-order now, I think it's a big companion with SX OS, also it's a big competition with R4S Dongle:)
       

Share This Page