hit tracker

Rebug 4.65.2 PS2 problem

Discussion in 'Codename: REBUG PS3 CFW Releases and Support' started by luke187, Jan 20, 2015.

  1. 17
    1
    0
    luke187

    luke187 Loyal Member

    Joined:
    Jan 20, 2015
    Location:
    USA
    Sorry but what is FSM and do I need to install 3.55 ofw and then go to 4.65.2 CFW?
     
  2. 924
    439
    63
    Joonie86

    Joonie86 Developer for Team Rebug Developer

    Joined:
    Nov 11, 2012
    Occupation:
    System Admin
    Location:
    dev_blind
    Home Page:
    http://rebug.me
    You need couple things for installation via FSM

    1. lv2diag.self files for get-in / get-out
    2. REBUG 3.55.4 REX CFW and TOOLBOX for FSM entry

    put your PS3 in FSM mode while on REBUG 3.55

    and then use that lv2diag.self file / and PS3UPDAT.PUP file in the root [REBUG 4.65.2]

    after hard reboot, your ps3 will start installing while in black screen [not bricked]

    after then it will shut off by itself after finishing

    then use another lv2diag.self to get out of FSM, put that in the root of USB,

    then let PS3 boot, it will shut off first after then you will have fresh-installed-REBUG 4.65.2
     
  3. 17
    1
    0
    luke187

    luke187 Loyal Member

    Joined:
    Jan 20, 2015
    Location:
    USA
    Ok where can i get the lv2diag.self files
     
  4. 924
    439
    63
    Joonie86

    Joonie86 Developer for Team Rebug Developer

    Joined:
    Nov 11, 2012
    Occupation:
    System Admin
    Location:
    dev_blind
    Home Page:
    http://rebug.me
  5. 17
    1
    0
    luke187

    luke187 Loyal Member

    Joined:
    Jan 20, 2015
    Location:
    USA
    Is this going to reformat the hard drive do i need to backup my save data and games i do not want to lose?

    Ok i installed rebug 3.55 put the lv2diag.self in file and the PS3UPDAT.PUB "rebug 4.56.2" on the root of the usb drive. I went into the rebug tool box and turned on the FSM and restarted with the usb stick in the far right slot. It stays on the black screen and just stays there. After a while the green power light flashes but thats all it has done so far.
     
  6. 924
    439
    63
    Joonie86

    Joonie86 Developer for Team Rebug Developer

    Joined:
    Nov 11, 2012
    Occupation:
    System Admin
    Location:
    dev_blind
    Home Page:
    http://rebug.me
    Yes, it wipes the whole thing, you should back up first if you have anything that's important

    so it keeps flashing green light?, hmmm I think you have to use different lv2diag.self or FSM install Rogero 3.55 3.7a

    http://www.mediafire.com/download/gdz7qg8aui807qk/Lv2diag.self

    Try this self with REBUG 4.65.2, see if it shuts off without flashing green light.

    If it still fails, try installing Rogero 3.55 3.7A
     
  7. 17
    1
    0
    luke187

    luke187 Loyal Member

    Joined:
    Jan 20, 2015
    Location:
    USA
    when i turn off the ps3 and turn it back on the screen is black and then the ps3 turns off. Do i need to put the out file on the sub stick to try and get it out or should i just put the file you sent me on the stick with rebut 4.65.2 and I'm supposed to put both files on the root of the stick right.
     
  8. 924
    439
    63
    Joonie86

    Joonie86 Developer for Team Rebug Developer

    Joined:
    Nov 11, 2012
    Occupation:
    System Admin
    Location:
    dev_blind
    Home Page:
    http://rebug.me
    For installation, you should use my lv2diag.self and the PS3UPDAT.PUP on the root of USB altogether

    After finishing installation, your ps3 should shut off instead of flashing led

    after then use that other lv2diag.self to get out, then your will see SONY logo
     
  9. 17
    1
    0
    luke187

    luke187 Loyal Member

    Joined:
    Jan 20, 2015
    Location:
    USA
    it went through and turned off now when i turn on the ps3 it turns back of after a few seconds and the screen stays black. I was able to get into safe mode and I'm reinstalling rebug 3.55 now in safe mode.

    Ok rebug 3.55 is now back on and I'm trying FSM again with the file you gave me.

    Ok that fixed it and my ps3 now plays games in full screen again. Thank you very much for all the help. I do have one more question. When you guys fixed the bugs in the ps2 emulator did you make it to where we can play 4 player ps2 games with 4 people using y controllers because that didn't work before.
     
  10. 924
    439
    63
    Joonie86

    Joonie86 Developer for Team Rebug Developer

    Joined:
    Nov 11, 2012
    Occupation:
    System Admin
    Location:
    dev_blind
    Home Page:
    http://rebug.me
    If you're running BC/Semi-BC you should have fully working wireless connections on 4 pads

    I'm glad that you managed :)
     
  11. 17
    1
    0
    luke187

    luke187 Loyal Member

    Joined:
    Jan 20, 2015
    Location:
    USA
    Sorry but i have one more question. My saves don't work not my ps3 said they are from a different ps3 do you know how i can fix them.
     
  12. 924
    439
    63
    Joonie86

    Joonie86 Developer for Team Rebug Developer

    Joined:
    Nov 11, 2012
    Occupation:
    System Admin
    Location:
    dev_blind
    Home Page:
    http://rebug.me
    You have to resign them or use Fake Save Owner function..

    You have to change debug setting menu as DEX from CEX QA
     
  13. 17
    1
    0
    luke187

    luke187 Loyal Member

    Joined:
    Jan 20, 2015
    Location:
    USA
    I tried resigning but that didn't work lol but the fake save owner works. Thanks buddy for all the help.
     
  14. 1
    0
    1
    Mr. Denni

    Mr. Denni Loyal Member

    Joined:
    Apr 25, 2019
    Location:
    Indonesia
    Would please re-upload the file 'cause I'm now getting the same problem (stuck in flashing green light)?
    Thanks
     

Share This Page